Common Setup - Datavideo HS-2850 Instruction Manual

Note: In the HS-2850, each input source must be associated with only one button. If you
associate one source to more than one button, corrupted small windows will appear on the
HS-2850 Multiview display. To avoid this please make sure your XPT setting is configured to
one input to one button arrangement.

3.4.4 Common Setup

The Common Setup tab will allow you to set up various image effects such as the logo, DSK
and PiP, as well as WIPE transition effects.
AUX Source
Clock Position
X-Position = Left to
Right; Y-Position =
Lower to Upper; Set
Hours; Set Minutes;
Clear Seconds
Console
AUX 1 Source 1 – 12
AUX 2 Source 1 – 12
Clock X 0 – 110
Clock Y 124 – 0
T-Bar Mode One Way
45
Button 2
Button 3
Button 4
Button 5
Button 6
Button 7
Button 8
T-Bar operates
transition in only
one direction.