Audio Delay - Datavideo HS-2850 Instruction Manual

5.7 Audio Delay

The HS-2850 switcher has a feature for Audio Delay up to 16 fields, or 8 frames. The audio
delay is expressed in fields with a default setting of '02' (2 fields / 1 frame) on each input
until you change it.
Setting the Audio Delay
1. Power on HS-2850 Unit.
2. On the Preview bus, select the input that you would like to set Audio Delay.
3. Press any arrow key under the designated Menu row.
4. Press the Down Arrow [▼] key until "Input Audio Settings" is selected.
5. Press the Right Arrow [►] key to enter into the Input Audio Settings Menu.
6. Press the Right Arrow [►] key to enter the Audio Delay Setting Menu.
The default setting is 02; which is measured in fields. 2 fields = 1 frame.
7. Use the Arrow keys to set the number of fields, or frames. You can set the delay from 1
to 16 fields, which is the equivalent of 1 to 8 frames.
8. When you have made your selection, press the Enter key
9. To Exit the Menu, press any key in the Program or Preview Bus.
Note: To set audio delay for all inputs: repeat the above steps for each individual input.
Otherwise, the Audio Delay will remain at the default setting of 02.
62