Table of Contents
Advertisement
Chapter 3
Software)
The Switcher Configuration Utility or the SEConfig Software allows you to configure the HS-
2850 with a Windows 7 computer using an Ethernet connection. Before launching the
Switcher Configuration Utility, make sure it is installed on your computer.
3.1 Network Setup
Before you attempt to establish connection between PC and your HS-2850, you have to
manually configure the PC network settings first. Follow the steps outlined below to assign a
static IP address to your PC.
(1) Connect the PC to the HS-2850 switcher using an Ethernet cable.
(2) Turn on the PC and the HS-2850.
(3) The HS-2850 then needs to be placed into PC Control mode. To do this press the PC
Control button on the HS-2850 Control Panel or keyboard.
(4) Find the switcher's IP address using the SEConfig software. Double click the SEConfig
software icon to open the Switcher Configuration Utility program.
(5) The Find button within the SEConfig software will help confirm the IP address of the
switcher. See later sections in this Chapter for more information on SEConfig. In the
example below, the IP address of the switcher is 192.168.0.101.
(6) Once you have obtained the switcher's IP address, go to Control Panel, open Network
and Sharing Center and then click Ethernet.
Switcher Configuration Utility (SEConfig
33
Advertisement
Table of Contents
