Transform" Tool - Panasonic KAIROS Operating Manual

3.3.3.3.3 "Transform" tool

Picture 3.3.3.3.3.1
Select "Transform" tool underneath the working area to position and resize an image using the
corresponding controls. Positioning the cursor in any cornered yellow box - with left mouse click and
holding, 2D-Size of the image can be modified. Positioning the cursor straight inside the picture, with
left mouse click and holding, allows positioning of the image in 2D space. The crosshair marked yellow
circle is identifying the "Rotation origin" position (aka Rotation-"Axis"), which can be adjusted while
left mouse clicking and holding it and dragging it over the GUI screen in the working area. The other
yellow arrow marked circle
within the GUI screen.
Apart from "Enable" or "Disable" and "Reset to Default," the functions "Scale," "Position" (X & Y or using
the drag-pad right next to it) are also available when expanding the "Transform 2D Settings" within the
"Parameter View" window, allowing to modify the values by mouse - using the slider or arrows
by entering numeric values in the designated area right next to the slider controls. Rotation coordinates
in "Parameter View" window are labeled "Rotation origin X/Y" (aka Rotation-"Axis"). Here, numeric
values can be entered or modified using the drag-pad right next to it. Also, the "Rotation" value (Z-
direction) can be modified using the slider or arrows
area right next to the slider controls.
Unfolding the "Advanced" controls within "Transform2D Settings" allows access to the "Cubic
interpolation" setting. This interpolation mode can be enabled using the check-box to the right (
Note: When positioning a Layer, regardless of using the "working area" or the "drag-pad" controls, while
holding down the keyboard "Ctrl"-key, only horizontal positioning is applied to the Layer object. When
holding down the keyboard "Shift"-key instead, only vertical positioning is applied to the Layer object.
Picture 3.3.3.3.3.2
can be used in the same style in order to adjust the "Z-Rotation" value
- or entering numeric values in the designated
- or
).
39