Panasonic KAIROS Operating Manual page 90

Picture 3.3.9.2.19
Picture 3.3.9.2.20
Picture 3.3.9.2.21
Picture 3.3.9.2.22
If necessary, all controls can be set manually by selecting from the currently
supported devices in the corresponding drop-down menu. The "Auto detect"
button in the main "PtzTrigger" Tab helps to explore and update the network
camera device list. As soon as all necessary settings are completed, the
"Available" check-box (first entry on top of the PtzTrigger-Tab) will be ticked
Simply select the model, for example, "AW-UE150,"
KAIROS will complete all the settings automatically
(Pictures 3.3.9.2.18 & 3.3.9.2.19), including the IP
address and the designated Port number.
"RTP-Tab" (RTMP):
Mode = Server (Listener) or Client (Caller)
Enter a Key or passphrase = if applicable
"RTP-Tab" (RTSP):
Enter "Resource name" = if applicable
Activate or deactivate the "Over TCP" selection
using the designated check box
"TallyTrigger-Tab":
In the TallyTrigger-Tab, an external Tally device
such as BFE-GPIO Box or a Panasonic Camera
interface can be set up. The following settings
are available depending on the device type:
- IP address of the Tally device.
- Port number of the Tally device.
- Tally Channel (Red, Green, Yellow, Blue,
Magenta, Cyan)
- Device type supported by selected protocol.
- Selected AUX-Bus (for Camera Return feed, if
applicable).
- Auto-detect device (when supported).
"PtzTrigger-Tab":
The "PtzTrigger" Tab addresses a wide variety
of Panasonic Camera remote controls including
Tally over IP.
The "Camera" menu
contains all Panasonic
Cameras available in
KAIROS network
(Picture 3.3.9.2.18).
.
Picture 3.3.9.2.24
.
Picture 3.3.9.2.23
90