Vtr - Panasonic KAIROS Operating Manual

4.6.2 VTR

To "Delete" a Control Panel Macro, press and hold the
"Delete" button in the lower left corner of the numeric
Keypad section (when delegated to "Macro") and click on
the Macro, which needs to be deleted. This is executed
instantly with no further safety request.
Note: Press and hold the "Delete" button allows multiple
Macros to be selected in a row, which will be instantly
removed after selection.
Picture 4.6.1.4
When Numeric Keypad section is delegated to "VTR," all
internal and external VTR/Server type of devices can be
controlled. Using the arrows "Left" & "Right" to cycle through
all available device list.
Selected device is Clip Player Channel-1.
TMC = Tape Motion Commands (Stopped after Clip load)
Loop = Loop Mode On/Off (Off)
Picture 4.6.2.1
When Numeric Keypad section is delegated to "VTR," all
internal and external VTR/Server type of devices can be
controlled. Using the arrows "Left" & "Right" to cycle through
all available device list.
Selected device is Ram Player Channel-1.
TMC = Tape Motion Commands (Play with Loop On)
Loop = Loop Mode On/Off (On)
Picture 4.6.2.2
Device Type
Previous
Timecode Position
Device
Clip Name
Device Type
Previous
Timecode Position
Device
Clip Name
Next
Device
Next
Device
119