Panasonic KAIROS Operating Manual page 38

Picture 3.3.3.3.2.5
Expand the Crop settings in the "Parameter View" panel below "Layer Settings" to modify the values
with the mouse (using slider or arrows
If the "Enable" button for Crop is not active
Preview will be displayed in the GUI viewing pane. Next to the "Enable" button is a "Reset to Default"
values button .
Picture 3.3.3.3.2.7
Unfold the "Advanced" controls (
individual Crop Edge Softness controls. By default, Global softness is enabled for crop edges as
indicated by the checked box (
( ), to enable individual edge softness controls, which you can control with a mouse (using slider or
arrows , or by entering numeric values. When "Global softness" is enabled, the controls for "Rounded
corners" are also activated and can be applied to the Layer.
) or entering numeric values.
, changes will not be visible on any video output, but a
) within "Crop Settings" to expose the "Rounded Corners" and
) next to "Global softness." Untick the check box for "Global softness"
Picture 3.3.3.3.2.6
Picture 3.3.3.3.2.8
38