There are 3 ways to "Rename" Inputs:
Picture 3.3.8.2.2
1. The "Input" drop-down menu in the Kairos Creator menu bar can be used,
2. the right mouse click menu at the selected "Input," or
3. the Keyboard shortcut "F2" on focused item.
All dialogs would be continued as follows:
Picture 3.3.8.2.4
Selecting an Input where a VTR is connected will enable additional controls:
Available
Clips on
external
device
Picture 3.3.8.2.6
Selected device type is VTR
Clip positioning/shuttle bar
External device TMC commands
.
Picture 3.3.8.2.3
Picture 3.3.8.2.5
Clip Timecode position
Loop Mode On/Off
Right mouse click
context menu.
Loaded Clip
81