Tools In Working Area - Panasonic KAIROS Operating Manual

Picture 3.3.1.3.16
Turning off "Preset enable," will deactivate the controls for "Source B" in the "Parameter View" panel
and disable the "Preset"-bus control, located at the bottom of the page.
Note: Also, meanwhile created A/B transitions will be affected by turning off "Preset enable."
Picture 3.3.1.3.17
4
Picture 3.3.1.3.18
Note: ChromaKey and LuminanceKey effects can be added multiple times to the default effects list. In
total, the ChromaKey and LuminanceKey effect can be used 4 times per Layer each.

3.3.3.3 Tools in Working Area

Picture 3.3.3.3.1
tools can also be enabled and modified in the "Parameter View" panel as described in the following
examples. "Path Linear" and "Path Animation" can be used once selected (and enabled) via the button
in the lower right corner
A list of default
effects for instant
use per
(picture 3.3.1.3.17).
For more effects,
use the
located in
the lower
corner
"Scenes"
Selecting
effects from the list
(picture 3.3.1.3.19)
will add them to the
default effects list
(picture 3.3.1.3.18).
The new
effects
disabled from the
main selection list
(picture 3.3.1.3.20).
.
Layer
button
right
of the
menu.
more
added
will be
Picture 3.3.1.3.19
Use the toolbox located under the
working area for quick access to the
"Select," "Crop," "Transform," and
"Corner Pinning"
selected, they can be controlled
using the mouse and wheel controls
in the working area. Additionally, all
Picture 3.3.1.3.20
tools. Once
34