How To Get Started - Panasonic KAIROS Operating Manual

1.6 How to get started

1. Once Kairos Core (Main Frame) is powered up, the Multi-viewer outputs can be seen from the
display port terminals (MV1/MV2) on the rear.
MV1
Note: Before turning on Kairos Core (Main Frame), it is necessary to connect the display port
terminals and turn them on. If the display port terminals are connected after Kairos Core (Main
Frame) is powered up, they may not be recognized.
2. Connect LAN1 of Kairos Core (Main Frame) and Kairos Creator (GUI PC) in the same network.
Open the Kairos Creator and connect to the Kairos Core with appropriate IP address setting.
Default IP address of Kairos Core LAN1: 192.168.10.10
The "MIXER" – "Control" menu is displayed on the Kairos Creator.
MV2
11