Panasonic KAIROS Operating Manual page 73

Note: The thumbnails of the displayed Clips represent the center frame of the Clip. When a Clip contains
an Alpha-Channel, the designated thumbnail is indicating a "Checkerboard" background. Thumbnails
are generated per "Clip" whether a Clip is loaded into Ram or not.
Picture 3.3.7.3.3
"Set mark-in," "Set mark-out," "Clear mark-in," & "Clear mark-out" are Clip-specific functions available in
the Clip-context menu (Picture 3.3.7.3.2) as well as in the Channel-context menu (Picture 3.3.7.3.3) and
are saved as Metadata per Clip. The "Set mark-in" & "Set mark-out" functions can be used in order to
trim a Clip regarding Start-time (TC) and/or End-time (TC).
The "Goto" function can address specific Clip position as listed "Begin," "End," "Mark-in (TC)," & "Mark-
out (TC)." The Channel-context menu additionally provides TMCs (Tape Motion Controls) for "Play,"
"Reverse Play," & "Stop."
Mark In
Picture 3.3.7.3.4
Ram Player Channel number
Loaded Clip Timecode position
Position/shuttle bar + Mark In/Out
Ram Player TMCs:
Start
Step Reverse
Fast Rewind Play Reverse
Channel OnAir Auto Play On/Off
Step Forward
Pause
Fast Forward
Play
Mark Out
Channel-1 Loop Mode On/Off
Ram Player TMC controls
Loaded Clip with thumbnail
Picture 3.3.7.3.5
Loop On/Off
End
OnAir Play On/Off
73