Panasonic KAIROS Operating Manual page 49

When selecting "Gain" from the right mouse-click context menu (picture 3.3.3.5.12) or the corresponding
keyboard shortcut [Ctrl+G], the "Gain Settings" will open for the selected Audio Channel (picture
3.3.3.5.14), allowing to individually adjust the 16 available Audio tracks per Audio Mixer-Channel. The
associated Fader or the "Volume" box underneath the Fader can be used for adjustments. Use "Ok" to
confirm changes. Pressing "Default" will set all 16 Tracks for the selected Audio Mixer Channel back to
"0.0dB" Gain (linear). "Cancel" will open the selection to either "Save," "Discard," or "Cancel" the former
changes to the Gain settings. Here is an example for "Ch 1" (Track-1 of 16).
Fader "Gain" control "Ch 1" (Track-1 of 16) for Audio Mixer Channel 1-16.
Numerically enter the "Gain" control "Ch 1" (Track-1 of 16) using the pop up dialog box.
A left mouse click on any of the "Gain" control windows will open
the "Gain Edit (ch #)" dialog (picture 3.3.3.5.15). To change the
default value (0.0 dB), use the arrows
value in the designated area. Use "Ok" to confirm changes.
"Cancel" will open the selection to either "Save," "Discard," or
"Cancel" the former changes to this Gain setting.
When selecting "Unset Source" from the right mouse-click context menu (picture 3.3.3.5.12) or the
corresponding keyboard shortcut [Ctrl+Shift+O], the Video source for the selected Audio Mixer Channel
will be cleared and set to "None".
Picture 3.3.3.5.16
Selecting the "Tools" drop-down menu in the top left corner
of the Kairos Creator menu enables "Generator 1 & 2
settings..." access. Open "Generator 1 or 2 settings..." in
order to setup Track 1-16 per Generator 1-2 regarding:
"Enable/Disable" (On/Off per Track/Channel)
"Level [dB]" (range is -100,00 – 0,00)
"Frequency [Hz]" (range is 0 – 20000)
All adjustments are made per Generator and Track.
- or enter a numeric
7Picture 3.3.3.5.14
Picture 3.3.3.5.15
Enable/Disable
Level [dB]
Frequency [Hz]
Tracks (Channel-1 selected)
Picture 3.3.3.5.17
49