Mixer Tab Selection; Control; Scenes - Panasonic KAIROS Operating Manual

3.3.3 Mixer Tab Selection

3.3.3.1 Control

The Mixer Main Tab contains all the sub-tabs for setting up and controlling the Mixer part of your
production. This is where you unleash most of your creativity!
1
Picture 3.3.3.1.1
The "Control" page gives you a touch screen software Control Panel (CP). All the buttons displayed on
screen can be used and operated like a hardware control panel. The lever arm (Fader) movement can
be controlled with a left mouse click or using the touch screen by pressing and holding while moving it.
In the upper right corner of every menu page is a "Record Macro" button. Left mouse-click on it or use
the touch screen button to start recording a new Macro in the Main-Macro section.
Right mouse click here to add or subtract elements controlled by the "Next Transition" principle.
Objects selected for "Next Transition" also affect the LAH-PVW (Look ahead Preview) and are
controlled via the Lever arm in addition to the "Cut" and "Auto" buttons below.
Look ahead Preview (LAH-PVW) is calculated from the component(s) including BGD and Layer(s) that
are selected for "Next Transition." These are usually operated with the Lever arm, the "Cut," or "Auto"
button below. The Preview functionality can be selected for individual Multiviewer tiles and Aux buses.
Beside the "Next Transition" selection method, each transition can still be executed individually, using
the "Cut" and "Auto" buttons located directly below their respective transition components.
The LAH-PVW shows the expected result of the next transition on the Preview Output before execution:
• Preset Bus (B-Side of enabled A/B-Bus), also when enabled on Layer
Layer is "Off" but enabled/selected for "Next Transition."
•

3.3.3.2 Scenes

The "Scenes" tab activates three dedicated drop-down menus in the menu bar: Edit, Insert, and Layer.
Edit
Picture 3.3.3.2.1
The Edit menu provides actions specific to modifying
Layers and Scenes. An action selected from the "Edit"
drop-down will be applied to the item that currently has
cursor focus. This could be an item in either the "Scenes"
or the "Layers" window.
The list of Edit functions with their keyboard shortcuts is
displayed to the left in Picture 3.3.3.2.1.
29