Settings - Panasonic KAIROS Operating Manual

3.3.1.2 Settings

The "Settings" tab of the menu bar contains several functions related to IP connection, import & export
environment (engineering setup) files:
Picture 3.3.1.2.1
Picture 3.3.1.2.2
Picture 3.3.1.2.4
Note: Audio fades are executed on PGM Layer or Aux buses after the designated Video crosspoint has
changed.
Picture 3.3.1.2.5
Note: Importing a new LUT-file requires rebooting Kairos Core.
Connect – IP-address for Kairos Core connection.
Export environment file - Saves the current Setup file with a
new file name and path (or keyboard shortcut Ctrl+Shift+E).
Import environment file - Opens a file browser to select &
load a Setup file (or keyboard shortcut Ctrl+Shift+I).
While "Connected" to the
Kairos Core, the actual
displayed IP address is
grayed out. When
"Disconnected," the
address can be edited and
confirmed with the
"Connect" button.
When selecting the "Audio Level Meter Settings...",
the audio bars for Multiviewers can be customized
regarding the listed controls for:
Clip level [db]
Warning level [db] = level for red bar indication
Caution level [db] = level for yellow bar indication
Min level [db]
Peak hold
Peak decay
Fade type
Fade time [ms]
Selecting "Import LUT Correction" allows importing
of 4 user defineable LUT's (Look_Up_Tables) "User
1-User 4" to be used for Layer and Aux-Bus color
corrections/management. A LUT needs to be in
"*".cube file format. These become available when
using the "
corner and selecting "LUTCorrection." At the end of
the "Index" list, User 1 – User 4 can be selected as
filters for the LUT correction.
IP
Picture 3.3.1.2.3
= maximum display Level
= minimum display Level
= hold peak audio level duration
= attack time to decay peak level
= X-Fade or V-Fade mode
= Audio dissolve duration
add effect" button in the lower right
24