To Stop - Chevrolet 1993 Corvette Owner's Manual

2- (Second Gear): Press the clutch
pedal as you let up on t.he accelerator
pedal and shift into 2. Then, slowly let
up on the clutch pedal
.as
you -press the
accelerator pedal.
3,4,!5
and 6 (Third, Fourth, E.i€th and
Sixth Gears): Shift
ihto
3,4,5 and
6
the same way you do for 2 . Slowly let
up
on the clutch pedal as you press the
accelerator pedal;
To stop
Let up an the acceleraTor pedal and
press the-brake pedal. Just before the
vehicle stops, press the clutch pedal
:and.the brake pedal, and shift to
N (Neutral).
N
(Neutral): Use this position when
you .startor idle your engine.
R (Reverse): To back up, press down
the clutch pedal-and shift into R (Reverse).
.Let up on the clutch pedal slowly while
pressing the, accelerator pedal.
I-f you shift €ram.<Overdrive into
RARevefse), the -shift lever must be first
placed in the N (Neutral) position
centered between
2
and 5 prior to
shifting into .R (Reverse).
Your 6-speed manual transmission has
a feature that
allows
you to s-afely.shift
into-R (Reverse) while the vehicle is
rolling (at less than
5 mph)
.
You will be
%clred-out" if you try to shift into
R
(Reverse) while
y0u.r
vehicle is
moving faster than 5. rhph.
If you haveturned your ignition off and
wish to park your car iii R (Reverse),
you
wlil have to move the shift leyer
quickly to the right, "crashing" through
the high load spring and then into gear.
71