Directional Controls; To Reset Your System - Chevrolet 1993 Corvette Owner's Manual

To Reset Your System:
1.
Turn your ignition.lrey to
Off
or
Lock.
2.
Pull the Courtesy Lights Fuse and
Radio Fuse .out of the- main fuse
panel for one minute.
3 . Put-the fuses back in and start your
vehicle. Your system shuuld be
working. If you still have a problem,
see your deder,
.For fuse location, see the
Index
under
Fuses E. CircuitBreakers and
Fuse
.Panel.
Directional Controls
When the €allowing buttons
are pressed,
an indicator light.
will glow
above .the
button and the fan speed will go to
AUTO
3f
unless you select a dBerent
speed. When the system is'changed
€rum OFF tu any mode, the inside
temperature setting is displayed for
several seconds before the .outside
temperature is again displayed.
& (Maximum
A/C): Use for
maximum cooling or quick cool-down
on very hot days.. This setting will not
operate when outside temperatures are
below 40°F (5°C)
I
- 2
(Bi-Level): This setting lets air
inte the vehicle only through the
.heater and air conditioner outlets and
brings.the temperature to the range
you choose. It controls the fan blower
speed by using t-he input signals.
Bi-Level al.so defogs the side windows,
You can. override the,fan blower speed
by using the
V
and
A
buttons.
a ( V e n t ) : In this setting, the
compressor will not. mn. The-system
will adju-st to the temperature you
choose, but it cannot cool the vehicle
to a temperature colder than the
outside air temperature, This setting