Table of Contents
Advertisement
Features
&
Controls
Passive Keyless Entry Settings
With Passive Keyless
E n t r y ,
you a m
use-
the system to operate both doors,
or'
only
the driver's door. You can
also
choose to disable the system, ifthere are
times when. you would prefer .not to use
Passive Keyless Entry.
To Sdtch Dbor Settings:
To switch the: setting, from automatically
locking .and unlocking the .driver's door
to autom,atically iocling: and unlocking
both doors:
1.
Insert the ignition key, but leave the
ipition off.
2.
With the transmitter
in
range, hold.
the.
DOOR, button for more than
two
seconds. The system.wil1 then cycle
the doox. locks.
3 . To switch back, repeat steps
I;
and
2.
Turning the Passive Keyless Entry
System Off
1,
Take the keys out of the-ignition.
2.
Hold the
DOOR
button on the
tramrnitter for longer than
two
seconds.
3 :
The: system will sfgnal the shut-off by
cycling the locks from lock to unlock.
T . 0
make sure the PKE system is off,
turn the ignition on and look for the
PASSIVE
KEYLESS
ENTRY hght
on the Driver Information Center. If
the PKE system Is on, the light will
come
on
for-two seconds. If the
systemis off, the light will not come
on.
When the system
is
off
or
me
transmitter is left at home, none
of
the
Passive Keyless. Entry features work.
But you will still be able to work the
manual
and
power locks, and
arm
the
theft deterrent system. See the Index
'under Door Lacks,
.Power Door Locks
and
Univerml Theft Deterrent.
. .
-
-
Advertisement
Table of Contents
