Chevrolet 1993 Corvette Owner's Manual page 152

FF (Fast Forward): Press to advance
the tape rapidly; press again to play.
(The radio plays while the tape is fast
forwarding.) The indicator light will
glow when this button is pressed.
REV (Reverse): Press to reverse the
tape rapidly; press again to play. (The
radio plays while the tape is
rewinding.) The indicator light will
glow when this button is pressed.
CrO,: Press this button when playing
high bias chrome or metal tapes. An
indicator light will glow when this
button is pressed. When playing
standard tapes, press again.
PROG (Program)
:
Press to change
the side of the tape being played.
Arrows in the display will indicate the
side currently playing. The tape player
automatically begins playing the other
side of the cassette when it reaches the
end of a tape.
SRCH (Search): Press to search for
the next selection on the tape. There
must be at least a three-second gap
between selections on the tape for this
function to work. An indicator light
will glow when this button is pressed.
SCAN: Press to listen to the beginning
eight seconds of each track or passage.
To stop scanning, press SCAN again;
the indicator light will go out and the
tape will continue to play.
REPT (Repeat): Press to return to
the beginning of the current selection
after 10 seconds or more of play. After
10 seconds or less of play, the player
will return to the beginning of the
previous selection.
EJCT (Eject): Press to have the
cassette tape ejected (the radio will
then play). This button will also work
when the radio or ignition are turned
Off.
STOPIPLAY: Press this to listen
to
the radio without ejecting the cassette.