Table of Contents
Advertisement
Se,rvice & Appearance Care
Headlight Bulb Replacement
(CON7")
4.
Then remove the two Phillips screws
from both sides of the cover, but
before you remove the last screw, put
your hand under the headlight cover
to hold it..
5.
Then reach around the .hood and pull
the cover straight out. Be careful not
to scratch the- paint.
6.
From the engine campartment side,
remove the four Phillips screws from
the retainer. These screws are near
each corner of the headlight. Don't
disturb the large-head adjusting
screws or your headlight
w i l l
be
improperly aimed.
HoHthe headlight when all the
screws are removed. Then remove the
retainer.
7.
Remove the headlight and unplug
8.
Plug in the new headlight and
the electrical connector.
replace the headIight retainer and
screws.
9.
Replace the headlight cover.
10.
Turn
off the parking lights.
Advertisement
Table of Contents
