Table of Contents
Advertisement
WETen your brake fluid falls to a.low
level, your brake warning light,
SERVICE
ABS
light and SERVICE
ASR
light will come on. The- anti-lock
brake and .acceleration slip regulation
systems are disabled when your brake
flu.id falls to
it
low level. See thedndex
under Brake System Warning Light;
To Add
Brake Fluid:
Lift the cap and pour in fluid to the
MAX
mark on the master cylinder.
Do
not oveffiI1.
&%at to Add:
When you do need brake fluid, use-
)nly DOT-3 brake fluid-such
as
lelcrr Supreme
1 P (GM
Part No.
.052535).
Use new brake fluid from a
'eded. container only.
NOTlCE
Replacing Brake System Parts
The braking system on a modern
vehicle is complex. Its many parts have
to be of top quality -and work well
together i f the vehicle is to haye really
good braking. Vehicles we design and
test have top-quality GM brake-parts in
the&, as your Corvette
does
when it is
new. When you replace parts of your
braking 'system-for example, when
your brakelinings wear down and you
have to have new ones put in-be sure
you get new genuine GM replacement
parts. If.you don't, your brakes may no
longer work properly. For example, if
someone.puts
in b.r&e linings
that are
wrong for your vehicle, .the balance
between your front and rear brakes can
change, for the worse. The braking
performance you've come to expect can
change in many other ways if.-someone
puts in the wrong replacement brake
parts.
27 I
Advertisement
Table of Contents
