Lamp Controls; Adaptive Cruise Control - Chevrolet SILVERADO 1500 LTD 2022 Getting To Know Manual

Table of Contents

Advertisement

LIGHTING

LAMP CONTROLS

Use the knob to activate the exterior lamps.
Off/On
AUTO
Automatically activates the exterior lamps
depending on outside lighting conditions.
Parking Lamps
Headlamps
Fog Lamps
F
Press to turn the fog lamps on/off.
Instrument Panel Brightness
Press and hold the +/– buttons to adjust
the instrument panel lighting.
Task Lighting
Press repeatedly to cycle through the
forward-facing outside mirror lamp options:
both lamps on, left lamp on, right lamp on,
both lamps off.
Cargo Lamp
F
With the vehicle in Park, Reverse, or
Neutral, press to cycle through the cargo
bed/hitch lamps and/or rear-facing mirror
lamps.
The button indicator illuminates
F
when the cargo bed lamps are on.

ADAPTIVE CRUISE CONTROL

The system enhances regular Cruise Control to
maintain a driver-selected following gap — the
time between your vehicle and a vehicle detect-
ed directly ahead — by accelerating or braking
automatically while you continue to steer.
Press and hold the
switch between regular
Adaptive Cruise Control.
Use the steering wheel controls to set and
adjust Cruise Control or Adaptive Cruise Control.
With Adaptive Cruise Control active, press and release the
to select a targeted gap setting of Far, Medium or Near.
12
Optional equipment
F
F
Cancel button to
Cruise Control and
INTELLIBEAM SYSTEM
The IntelliBeam system automatically
turns the high-beam headlamps on/
off based on traffic conditions at night
when the lamp control is in the AUTO or
position and the system is activated,
indicated by a green
ment cluster. A blue
high-beam headlamps are on.
To turn the IntelliBeam system on or
off, press the
the turn signal lever with the lamp
control in the AUTO or
Note: The fog lamps must be off to activate the
IntelliBeam system. IntelliBeam activates the
high-beam headlamps only when driving over
25 mph.
See Lighting in your Owner's Manual.
F
See Driving and Operating in your Owner's Manual.
F
on the instru-
appears when the
button on the end of
position.
Following Gap button

Advertisement

Table of Contents
loading

Table of Contents