Fan Power Connectors - AOpen AP43 User Manual

Hardware Setup

Fan Power Connectors

The board comes with one 2-pin and one 4-pin fan power connector.
The 2-pin fan power connector is marked CN3 on the system board.
To connect, plug the connector to its corresponding pin as shown in
the following figure.
To connect the 4-pin fan power connector, simply plug it into the 4-pin
connector marked CN4 on the system board.
+12V
GND
GND
CN3
2-pin fan power connector (J2)
+5V +12V
CN4
User's Guide
2-24