Power Connector; Break/Suspend Connector - AOpen AP43 User Manual

Power Connector

A standard power supply has two cables with six wires each. Attach
these cables to the power connector on the board in such a way that
all the black wires are in the center.

Break/Suspend Connector

The Break/Suspend connector is a 3-pin connector labeled JP30 on
the system board. Pressing the break switch on the front bezel forces
the system to enter the suspend mode. Pressing any key on the
keyboard returns the system to normal mode.
You cannot use the break switch and the
turbo switch at the same time.
User's Guide
Hardware Setup
2-23