Upgrading The Microprocessor - AOpen AP43 User Manual

Hardware Setup
3. Pull down the socket lever to lock the CPU into the socket.
4. Plug the fan cable into the onboard fan connector.
5. Set the jumpers accordingly. See the following sections for the
correct jumper settings.

Upgrading the Microprocessor

Follow these steps to upgrade the CPU:
1. Turn off the system power and remove the housing cover.
2. Locate the CPU socket on the system board.
3. Pull up the socket lever.
4. Remove the installed CPU.
5. Install the upgrade CPU.
Microprocessor for instructions on how to install a CPU.
2-4
Refer to the section Installing a
User's Guide