Power Management Setup; Bios Power Management Mode - AOpen AP43 User Manual

AMI BIOS

Power Management Setup

Power Management
The screen below appears if you select from
Power Mgmt
e
the main menu. To select, highlight and press or
double-click on the Power Management icon.

BIOS Power Management Mode

The settings for this parameter depend on the CPU type in use. If the
CPU in use has SMM feature, the available settings for this parameter
Enabled
are Enabled and Disabled. Select to take advantage if the
power-saving feature.
If the CPU in use is a non-SMM type, you need to assign an IRQ for
the power-saving function. The selections are IRQ 11, IRQ 12, IRQ
15 and Disabled. Disable the parameter to bypass the feature.
Disabled
The default setting for this parameter is . When disabled,
only the screen above appears on the monitor. When enabled, it
allows you to configure the power-saving feature. The following
screens appear if you enable the BIOS Power Management
w y }
parameter. Use or to highlight the desired parameter. Press to
view the remaining parameters.
User's Guide
3-22