System Boot-Up Cpu Speed; Turbo Switch Function; Password Checking; Cpu Selection - AOpen AP43 User Manual

AMI BIOS

System Boot-up CPU Speed

Set the system speed to High or Low with this parameter.
the default setting.

Turbo Switch Function

This parameter lets you enable or disable the turbo switch function.
Enabled.
The default setting is

Password Checking

The settings are Setup and Always. The Setup setting allows the
system to boot and use the password to protect the Setup Utility
Configuration settings from being tampered with. The Always setting
requires you to enter the password everytime you boot the system.
Setup
The default setting is

CPU Selection

The available settings for this parameter are Auto, Intel, AMD and
Cyrix. Check your CPU before setting this parameter. Otherwise,
Auto
select to automatically configure the CPU. The default setting
Auto
is .

Cache

External Cache
This parameter lets you enable or disable the secondary cache. The
Enabled
default setting is
troubleshooting a problem.
3-10
.
.
Leave it enabled unless you are
High
is
User's Guide