AOpen AP43 User Manual page 64

We
parameter to
the PIO mode manually, make sure that
you know your HDD type.
Primary Slave PIO Mode
If this enhanced IDE parameter is set to
detects the PIO mode (mode 0, 1, 2, 3, 4) and sets the interface
timing of the slave drive connected to the primary IDE connector. If
you know your HDD PIO mode, you can set this parameter manually.
Auto
The default setting is
Secondary Master PIO Mode
If this enhanced IDE parameter is set to
detects the PIO mode (mode 0, 1, 2, 3, 4) and sets the interface
timing of the master drive connected to the secondary IDE connector.
If you know your HDD PIO mode, you can set this parameter
manually. The default setting is
Secondary Slave PIO Mode
If this enhanced IDE parameter is set to
detects the PIO mode (mode 0, 1, 2, 3, 4) and sets the interface
timing of the slave drive connected to the secondary IDE connector. If
you know your HDD PIO mode, you can set this parameter manually.
Auto
The default setting is
User's Guide
recommend that you
Auto
. If you prefer to set
Auto
.
Auto
Auto
.
Auto
.
AMI BIOS
set this
, it automatically
, it automatically
, it automatically
3-19