Hardware Setup
Connectors
Multifunction Connector
This 20-pin connector is marked J7 on the system board. It supports
a number of system functions:
LED, turbo, reset, keylock, and
speaker. Attach the front panel connectors to the corresponding pins
as in the illustration below.
Speaker
Power LED Keylock
Speaker
Power LED
Keylock
Reset
Break Switch Green Mode LED
Reset
Turbo Switch
Turbo LED
(Green Mode LED)
( Turbo Switch ) ( Turbo LED )
Some housings have a five-pin connector for the keylock and power
LED. See the following illustration.
User's Guide
2-20