Multiple-Task Mode - Icom IC-M510 Instruction Manual

TRIAL MODE - Click here for more information

■ Multiple-task mode

If the Multiple-task function is enabled, the transceiver can hold up to 7 tasks. You can
the Multiple-task mode, select "Multiple" in the "Procedure" on the Menu screen. (p. 47)
[MENU] > Settings > DSC > Procedure
When the Multiple-task mode is activated,
NOTE: The Task mode has a Time-out Timer (TOT) function. After a certain period of
a task and returns to the operating screen.
displayed for 10 seconds.
D Holding a DSC task
Example: When a Group call is received:
Alarm OFF
1. Push to turn OFF the alarm.
• The received call's information is displayed.
Hold
2. Push .
• The received Group call task is held into the task list
and returns to the operating screen.
D Activating the held DSC task
1. Push Task List to display the task list.
• The task list is displayed.
2.
Active
3. Push to activate the task.
• The activated task information is displayed.
4. Push [PTT] to communicate.
5. After finishing the communication, push
delete the task.
Task List is displayed on the operating screen.
Delete
to
7
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
44