Icom IC-M510 Instruction Manual page 18

5
TRIAL MODE - Click here for more information
2
PANEL DESCRIPTION
D Information area
The following indicators are displayed in the
Information area.
Indicator Description
Displayed when receiving a
signal or when the squelch is
open.
Displayed while transmitting.
Displayed when high power is
25W
selected.
Displayed when low power is
1W
selected.
Displays the selected channel
group, INT (International), USA,
USA, INT, CAN (Canada), WX (Weather
channel).
CAN, WX
When the WX-Alert is set to
ON, " " is displayed.
Displayed when the transceiver
receives valid position and time
data.
Blinks when invalid GPS data is
being received.
Displays the WLAN signal
strength while connected to a
wireless network.
• Displayed while accessing to
the optional CT-M500.
• In the Client mode,
displays the WLAN signal
strength.
Displayed when the Auto
Foghorn function is activated.
(p. 75)
Displayed when the battery
voltage is low
Displayed while accessing to
the mobile device using the
RS-M500.
The number indicates the
number of connected mobile
devices.
Displayed when there is a
target in the CPA/TCPA alarm
function.
• Displayed when there are
unread DSC messages.
• Blinks when a DSC message
is received.
Displayed when the "CH Auto
Switch" in DSC Settings is set
to an option except "Accept."
D Channel area
The selected operating channel number,
channel name, and the following indicators
are displayed in the Channel area.
Indicator Description
Displayed when a Favorite
channel is selected.
Displayed when the Call channel
CALL
is selected by holding down
Displayed when a Duplex
DUP
channel is selected.
Displayed while in the Standby
STBY
mode.
Displayed while in the Radio
Telephone (RT) mode.
RT
Returns to the Standby mode
if no operation occurs during
the preset period of time.
Displayed after making or
receiving a DSC call.
If the transceiver is in the
DSC
Multiple Task mode, the
number of DSC tasks is
displayed by the indicator.
Displayed when in the RX Hailer
mode. (p. 73)
SCAN Displayed during a Priority scan.
(p. 17)
16
Displayed during a Normal scan.
SCAN
(p. 17)
Displayed during Dualwatch.
DUAL
(p. 18)
16
Displayed during Tri-watch.
TRI 16
(p. 18)