Icom IC-M510 Instruction Manual page 96

83
TRIAL MODE - Click here for more information
10
■ Menu items description
Inactivity Timer
The transceiver automatically returns to the
operation screen if you push no key for the
set period of time for each mode.
Not DSC Related
DSC Related
Distress Related
to a Distress call is displayed.
RT Related
GPS
Selects a satellite to be used for GPS
(Global Positioning System) to pinpoint
the geographic location of your transceiver
This setting may not be usable, depending
on the transceiver version or presetting.
GPS
The GPS (Global Positioning System) is
permanently set to ON.
GLONASS
Sistema) satellites.
SBAS
OFF.
When turning ON this function, the GPS
position accuracy can be improved.
RX Hailer
See page 73 for details.
Noise Cancel
noise components in the received or
transmitted signal. Set the function for both
receiving and transmitting.
RX
OFF:
components in the received
signal to approximately one half.
components in the received
signal to approximately one third.
components in the received signal
to approximately one tenth.
TX
components in the transmitted
signal to approximately one third.
OFF:
PWR SW from MIC
transceiver at same time that you turn OFF
the command microphone.
is required to use this
function.
All Units
When you turn OFF the command
microphone, the transceiver is turned
OFF at the same time.
Own Unit
The transceiver is not turned OFF
even if you turn OFF the command
microphone.