Icom IC-M510 Instruction Manual page 81

TRIAL MODE - Click here for more information
Selecting in the AIS list:
1. Open the list screen.
Target/Danger/Friend list
2.
3. Push .
NAV
• "Start navigation. Are you sure?" is displayed.
4. Push to start navigation. to start navigation.
OK
• The plotter screen is displayed, and the transceiver starts to navigate.
• is displayed on the plotter screen.
TIP:
1. Repeat steps 1 ~ 2.
2. Push
Details
• The "Details" screen is displayed.
3. Repeat steps 3 ~4.
D Stopping navigation
Stop NAV
1. Push to stop navigation.
• "Stop navigation. Are you sure?" is displayed.
2. Push .
OK
• The transceiver stops to navigate, and then returns to
the previous screen.
D Resetting navigation
The transceiver resets the start position, and restarts
navigation from your current position.
The function works only when the transceiver is receiving
valid GPS signals.
The function cannot work while in the MOB mode, or when
the transceiver does not navigate.
1. Open the "Reset Navigation" screen.
[MENU] > Navigation > Reset Navigation
• "Reset navigation. Are you sure?" is displayed.
OK
2. Push .
• The transceiver resets the start position, and restarts
navigation from your current position.
9
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
68