Icom IC-M510 Instruction Manual page 103

TRIAL MODE - Click here for more information
8.
• "CT-M500" screen is displayed.
9. Select "WLAN Setup" then push [ENT], [CH/ENT], or
• "WLAN will be temporarily disconnect during this
operation.", or "This menu resets the CT-M500. Also,
WLAN is temporarily disconnect." is displayed.
10. Push OK
• The transceiver starts searching the devices connected
to the CT-M500 network.
11. A list of CT-M500 is displayed.
If the CT-M500 you want to select is not found, wait
to repeat step 9.
12. Select the device to send the data to the transceiver,
and push [ENT] or [CH/ENT].
• Started the CT-M500 WLAN setting up.
13. "Setup successful" is displayed when the CT-M500
and the transceiver are connected.
• When the setup is successful,
WLAN SETTING
is displayed
11
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
90