Icom IC-M510 Instruction Manual page 62

49
TRIAL MODE - Click here for more information
7
DIGITAL SELECTIVE CALLING (DSC)
■ Making an Individual call using an AIS transponder
D D
Using an AIS transponder Using an AIS transponder
Transponder operation:
1. Select an AIS target on the plotter display, Target,
Danger, or Friends list screen.
details.
2.
•
3. Select "Send DSC," and then push [ENT].
•
4.
• Voice channels are already preset into the transponder
in the recommended order.
NOTE: When a base station is selected in step 1, a
Therefore you cannot change the channel. The
5. Push [ENT] to make the Individual DSC call.
• "Transmitting individual call" is displayed.
If Channel 70 is busy, the transceiver stands by until
the channel becomes clear.
6. After making the Individual DSC call, "DSC
transmission completed." is displayed.
• If the transceiver cannot make the call, "DSC
transmission failed." is displayed.
Transceiver operation:
7.
Alarm OFF
received, push
•
station you called cannot use the channel.
• To reply, push [PTT] and speak at a normal voice
level.
• You can check the MMSI code or the name, if entered,
of the AIS target on the display.
Alarm OFF
received, push
8. After the communication is finished, push
return to the normal operating mode. return to the normal operating mode.
to stop the alarm, and then
to stop the alarm, then the
STBY
to