Icom IC-M510 Instruction Manual page 98

85
TRIAL MODE - Click here for more information
10
■ Menu items description
FAV on MIC
through only the Favorite channels.
through all channels.
Channel Display
You can select the number of digits to
display the channel number.
This setting may not be usable, depending
on the transceiver version or presetting.
3 digits: The channel number is displayed
4 digits: The channel number is displayed
in 4 digits, such as "1001."
LO/DX
OFF.
• NMEA
[MENU] > Settings > NMEA
NMEA 0183
Select the data transfer speed for each port
to receive data from external devices.
4800 bps: Select to receive position data
from an external GPS receiver.
NMEA 2000
used to connect various marine devices
and display units in the vessel.
The transceiver can easily connect to a
functionality, and display the information
See the next page for the compatible PGN
list.
1.
2. Select the type of data from the menu
3. The transceiver starts searching the
Push Stop Search to stop searching
devices and display the device list.
4. The list of connected device is
displayed.
5. Select the device to send the data to
the transceiver, and push [ENT] or
Push INFO to display the detail of
device.