Icom IC-M510 Instruction Manual page 119

TRIAL MODE - Click here for more information
The transceiver is locked up, and does not respond.
A software error has occurred.
Turn OFF the transceiver, and then turn it ON again.
The transceiver does not work.
Contact your dealer.
The collision alarm does not sound.
The collision alarm function is OFF.
Turn ON the collision alarm function. (p. 60)
You cannot connect to the CT-M500 or the mobile devices.
The WLAN function is OFF.
Turn ON the WLAN function. (p. 88)
SSID is set incorrectly.
Check the SSID on both the IC-M510 and the access point.
CT-M500 is a bad connection to the power supply.
Check the connection to the CT-M500 and power supply.
TROUBLESHOOTING
14
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
106