Table of Contents
Advertisement
■ Multiple-task mode
(For only the USA version, depending on the presetting)
If the Multiple-task function is enabled, the transceiver can hold up to 7 tasks. You can
handle more than 2 DSC tasks simultaneously by switching between the tasks. To use
the Multiple-task mode, select "Multiple" in the "Procedure" on the Menu screen. (p. 45)
[MENU] > Settings > DSC > Procedure
When the Multiple-task mode is activated,
NOTE: The Task mode has a Inactivity Timer function. After a certain period of time has
passed without any operation on a task, the transceiver automatically deletes a task
and returns to the operating screen.
When a Inactivity Timer activates, an alarm sounds and a count down message is
displayed for 10 seconds.
D Holding a DSC task
In the Multiple-task mode, you can hold or activate the DSC task as follows.
Example: When a Group call is received:
1.
Push
• The received call's information is displayed.
2.
Push
.
• The received Group call task is held into the
task list and returns to the operating screen.
D Activating the held DSC task
1.
Push
to display the task list.
• The task list is displayed.
2.
Select the task that you want to activate.
3.
Push
to activate the task.
• The activated task information is displayed.
4.
Push [PTT] to communicate.
5.
After finishing the communication, push
to delete the task.
DIGITAL SELECTIVE CALLING (DSC)
to turn OFF the alarm.
is displayed on the operating screen.
7
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
42
Advertisement
Table of Contents
