Preparation; Entering The Mmsi Code - Icom IC-M510 Instruction Manual

TRIAL MODE - Click here for more information

■ Entering the MMSI code

The Maritime Mobile Service Identity (MMSI: DSC self ID) code consists of 9 digits.
This initial code can be entered only once.
After entering, it can be changed only by your dealer or distributor.
If your MMSI code has already been entered, doing the steps below is not necessary.
1.
•
your MMSI" is displayed.
2.
• The "MMSI INPUT" screen is displayed.
If you skip the entry, you cannot make a DSC call. To
enter the code after skipping, turn OFF the power, and
then turn it ON again.
3. Enter the MMSI code.
TIP:
•
•
number.
•
4. Repeat step 3 to enter all 9 digits.
Next
5. Select
entered code.
•

PREPARATION

3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
8