Mounting The Transceiver - Icom IC-M510 Instruction Manual

97
TRIAL MODE - Click here for more information
12
CONNECTIONS AND MAINTENANCE

■ Mounting the transceiver

D Using the supplied mounting bracket
You can mount the transceiver on a dashboard using the universal mounting bracket
supplied with your transceiver.
CAUTION: KEEP the transceiver and microphone at least 1 meter (3.3 ft) away from
the vessel's magnetic navigation compass.
NOTE: The built-in GPS antenna is located, as shown
to the right.
Be sure that the transceiver is positioned where the
transceiver has a clear view to receive signal from
satellites.
1. Mount the bracket securely to a surface which is more than 10 mm thick and can
support more than 5 kg using the 4 supplied screws (5 × 20 mm).
NOTE:
using the user supplied bolts and nuts, as shown below.
2. Attach the transceiver to the bracket so that the face of the transceiver is at 90° to
your line of sight when operating it.
Adjust the function display angle to be easy-to-read.
Mounting Example
Mounting screws
Spring washers
Flat washers