Defining The Switching Output To Be Logged; Delay To Min / Max Storage Of Humidity; Delay To Min / Max Storage Of The Temperature - Bosch Rexroth WGM Operating Instructions Manual

32/46 Operation
Bosch Rexroth AG, RE 51550-B/09.2019

5.1.9.5 Defining the switching output to be logged

Here, the switching output to be logged is selected. Only one switching output can
be logged.
The following options are available:
Selection:
Logging of the switching output.
Important notice:
The values are saved from the volatile to the non-volatile memory approx.
every three hours.

5.1.9.6 Delay to min / max storage of humidity

In order to record reliable values with fluctuating input variables, a delay can be
set for storing the minimum and maximum humidity. The time period in seconds
in which the signal must be permanently present before the humidity is logged is
specified here.
The following options are available:
Setting range: 0...100 seconds
▶
▶

5.1.9.7 Delay to min / max storage of the temperature

In order to record reliable values with temperature variations, a delay can be set
for storing the minimum and maximum temperature variation. The time period in
seconds in which the signal must be permanently present before the temperature is
logged is specified here.
The following options are available:
Setting range: 0...100 seconds
▶
▶
OUTi to OUTx
Open the value list with the u key.
Set the value with the q and p keys and confirm with the ukey (e.g.
5 seconds). The device returns to the submenu.
Open the value list with the u key.
Set the value with the q and p keys and confirm with the ukey
(e.g. 5 seconds). The device returns to the submenu.