General Key Functions - Bosch Rexroth WGM Operating Instructions Manual

5.1.3 General key functions

Operation is carried out via the keys below the display.
A detailed explanation of the menu control can be found in the following chapters.
Key Mode
Measured value display:
u
In the menu:
At the end of the menu:
After input/selection:
Measured value display:
p
In the menu:
Measured value display:
q
In the menu:
In the menu:
q+ u
In the menu:
p+ u
60 s In the menu:
no action
Proceed as follows to select a menu item and set the values:
▶ Open the main menu with the
▶ Select the submenu with the
▶ If necessary, select the next submenu with the
key.
u
▶ Select the desired menu item with the
the key.
u
▶ Use the and keys to set the value and confirm with the
q p
settings are saved and the device returns to the submenu.
▶ Exit the submenu by selecting the EXIT menu item and confirming with the
The device returns to the superior menu or to the measured value display.
Function
Change of the displayed measurement.
Change to a subordinate menu.
Change to the superior menu.
The display indicates the end of the menu.
Confirm and save an entered numerical value or
a function selection.
If the parameter is changed, the display flashes.
Display of the configuration.
Scroll menu item, numerical value or function
selection upwards. When holding down the key,
this is done continuously.
Change to the main menu.
Scroll menu item, numerical value or function
selection downwards. When holding down the key,
this is done continuously.
Exit the main menu/submenu/optional menu and
return to the measured value display without
saving the changed parameters.
Change to the next higher menu level.
Exit the main menu/submenu/optional menu.
key.
q
and keys and open the submenu with the
q p
and
q
and keys and open the value list with
q p
RE 51550-B/09.2019, Bosch Rexroth AG
Operation 15/46
u
keys and open it with the
p
key. The changed
u
key.
u
key.