Calling The Log Book; Calling The Error Log Book - Bosch Rexroth WGM Operating Instructions Manual

30/46 Operation
Bosch Rexroth AG, RE 51550-B/09.2019

5.1.9.1 Calling the log book

The last 6 events of the logged switching output can be called up here and all entries
can be deleted:
The log entries are displayed in the following manner:
▶ Recent event jO i took place x hours (h) / days (d) ago
R
▶ Events 2 to 5 took place x hours / days ago
...
...
...
▶ Oldest event took place x hours / days ago
jO 6
R
▶ Delete function ( --- )
The index of the entry x is displayed alternating with the time, e.g.
⇔ 1.4
Press the u key to return to the submenu or use q, p to select the next
log entry.
Pressing the u key to confirm the display
and returns to the submenu.
Notice:
If no events have been recorded, the display changes between
NON

5.1.9.2 Calling the error log book

Error messages can be called up and deleted here:
The error messages are deleted in the following manner:
▶ Display of the error number
▶ Delete function
If an error occurs, the error number is displayed here (see table in
chapter Troubleshooting and remedy [> page 35]).
Press the u key to return to the submenu or use q to select the display
Confirm the display
for the most recent event 1.4 hours ago.
.
with the u key to reset the error messages.
Example:
jO 1 ⇔ 1.3 , key q
R
⇔ , key q, p
jO 2 2.4
R
⇔ , key q, p
jO 3 6.1
R
⇔ , key q, p
jO 4 8.2
R
⇔ *, key q, p
jO 5 NON
R
⇔ *, key q, p
jO 6 NON
R
--- , key p; u = delete
* not yet assigned,
there have been only 4
events
jO i
R
clears the event list
and
jO x
R
Example:
, key q
0
--- , key p; u = delete