Recall Stored Label Format; S Set Feed Speed - Datamax A-4310 Programmer's Manual

r

Recall Stored Label Format

This command is used to retrieve label formats stored on a memory module.
Syntax:
Where:
The samples below explain different ways to recall and print a label format. (To view a memory
module's directory of label formats use the <STX>W command.)
Sample 1:
Sample 2:
Sample 3:
S Set Feed Speed
This command controls the rate at which the label is moved through non-printed areas. The setting
remains unchanged unless another feed speed command is received or until the printer is reset.
Syntax:
Where:
Sample:
The sample sets the feed speed to 3 inches per second (76 mmps), and prints two labels. The feed
speed for the second label is the same as the first.
Class Series Programmer's Manual
Label Formatting Command Functions
rnn...n
- Is a label name, up to 16 characters in length.
nn...n
String Sent:
<STX>L<CR>
rTEST<CR>
Q0002<CR>
E<CR>
<STX>L<CR>
rTEST<CR>
X<CR>
<STX>G<CR>
<STX>L<CR>
D11<CR>
PO<CR>
SO<CR>
rTEST<CR>
E<CR>
Sa
a - Is a single alpha character representing a speed; see Appendix
L for valid ranges.
<STX>L
SE
141100001000100LABEL1<CR>
E
<STX>L
1411000010001000LABEL2<CR>
E
Printer Interpretation:
Begin label format
Retrieve format named TEST
Quantity requested = 2
Terminate formatting and print
Begin label format
Retrieve format named test
Terminate formatting
Print
Begin label format
Dot size = 1x1
Print speed O
Feed speed O
Retrieve format named test
Terminate formatting and print
119