Stx Kur Read Data From Rfid Tag - Datamax A-4310 Programmer's Manual

STX KuR Read Data from RFID Tag
(Direct Mode – UHF Interface – Hexadecimal Data Only)
This command instructs the RFID device to read data from the tag and then place that data into a
replaceable field. It is expected that the tag transponder is within the read / write distance of the RFID
programming device; otherwise, "Void" will be printed in the text or bar code label field(s).
Note: Data should be at least 16 or 24 characters in length.
Syntax:
Where:
Sample:
The sample creates a replaceable text field (01) and bar code field (02) and then recalls the data from
the tag and places it into the specified fields.
106
Extended System-Level Command Functions
<STX>KuRaa<CR>
- Field number in which to place the data (must be 01, 02, 03, etc.)
aa
matching the order of Label Formatting command, U.
Note: The 00 value will send the unique tag ID to the host with no
printing.
<STX>L
D11
1911A1801000100 xxxxxxxxxxxxxxxx
U
1A31050002000200 xxxxxxxxxxxxxxxx
U
X
<STX>KuR01
<STX>Kur02
<STX>G
Class Series Programmer's Manual