Quick Test Mode; Print Quality Label - Datamax W-6208 Operator's Manual

4.3 Quick Test Mode

This section explains the functions of the resident Quick Tests, accessible by
pressing the
Notes: (1) With the exception of the Configuration Label, all Quick Test
labels require 4-inch (102mm) wide media to print the entire format. If
using narrower media, change the Label Width setting (Section
4.1.2) to match your media's width to avoid printing on the platen.
(2) During any Quick Test, press the
key to stop printing.
(3) Using the 'Print Test Rate' feature (Section 4.1.7), a time delay
can be set for printing labels in Quick Test Mode.
4.3.1

Print Quality Label

The Print Quality Label provides an indication of overall print quality at a pre-
selected heat and speed setting. This format consists of compliant bar codes in
fence and ladder orientations, assorted font sizes, and graphic fill patterns. These
can be used to ensure conformance, as well as aesthetics. To print a Print
Quality Label:
Press the
Use the
Use the
Press the
50
key on the Front Panel.
key.
key to scroll to 'Print Quality Label'.
key to select a quantity; see Section 4.0.3.
key to start printing.
key or the
W-Class