Stx Kq Query Memory Configuration - Datamax A-4310 Programmer's Manual

STX KQ Query Memory Configuration
This command causes the printer to transmit, in a model-dependent format, its DRAM memory
configuration (i.e., total amount installed, amount available for configuration, and amount currently
assigned to specific functions or entities) to the host device.
Syntax:
Non-Display Model
response format:
Where:
Class Series Programmer's Manual
Extended System-Level Command Functions
<STX>KQ<CR>
INTERNAL MEMORY<CR>
VER: aa-cdd.ee mm/dd/yy<CR>
INSTALLED: iiii<CR>
AVAILABLE: vvvv<CR>
MODULE: X:xxxx<CR>
SCALABLE: ssss<CR>
LABEL MEM: LLLL<CR>
LABEL SIZE: wwww:gggg:oo<CR>
- ASCII Carriage Return (0x0D) record delimiter.
<CR>
- ASCII string sequence that represents the firmware version
aa-
number string.
cdd.ee
mm/dd/yy
- The number of 4KB blocks of DRAM memory.
iiii
- The number of 4KB blocks of DRAM available for
vvvv
configuration.
- ASCII character identifying a DRAM module followed by an
X:
ASCII colon (:). If no Internal Module is present, this field
and its associated legend will not appear.
- The number of 4KB blocks of DRAM allocated as an
xxxx
Internal Module.
- The number of 4KB blocks of DRAM assigned to the
ssss
smooth scalable font processor cache.
- The number of 4KB blocks of DRAM assigned to label print
LLLL
buffer.
- Current maximum printable label width (in 100
wwww
or millimeters).
- Current printable length (in 100
gggg
200 min. / 640 max.
- Current label dimension unit's designation: "IN" for inches
oo
or "MM" for millimeters.
ths
of an inch
ths
of an inch or millimeters),
97