Stx Kth Read And Feedback Tag Information To Host; Stx Ktr Read Data From Rfid Tag - Datamax A-4310 Programmer's Manual

STX KtH Read and Feedback Tag Information to Host
(Direct Mode – HF [13.56 MHz] ISO15693 Tag Interface)
This command returns the tag info to host.
Note: This command only works when the Data Flag for the tag is
DSFID, AFI, VICC and IC data).
Syntax:
Sample Feedback:
STX KtR Read Data from RFID Tag
(Direct Mode – HF [13.56 MHz] ISO15693 Tag Interface)
This command instructs the RFID device to read data from the tag and then put that data into a
replaceable field. It is expected that the tag transponder will be within the read / write distance of the
RFID programming device; otherwise, "Void" will be printed in the text or bar code label field(s).
Syntax:
Where:
* Dependent on transponder manufacturer.
102
Extended System-Level Command Functions
<STX>KtH
DATA FLAG: 0x0F
TAG ID: E004010000751412
DSFID: 0xE3
AFI: 0x01
NUM BLK: 0x1B
BLK SIZ: 0x03
IC REF: 0x01
<STX>KtRUn n Haaabbbcdee<CR>
1... 16
- (Optional) Where n
Un ...n
1 16
hexadecimal format. Must be sixteen characters long.
- (Optional) Hexadecimal data – An "H" may be added directly
H
after "R" to return a two character hex value of the data. Since
there are two digits per hex value, replaceable fields should be
twice as long than if using ASCII data (e.g., the character "A"
would be returned as "41").
- Starting block number (000
aaa
- The number of blocks to read (001
bbb
number).*
- The number of retry attempts, 0-9.
c
- Reserved. Should be 0.
d
- Field number in which to place the data (must be 01, 02, 03,
ee
etc.) matching the order of Label Formatting command, U.
Note: The 00 value will send tag data to the host with no printing.
(i.e., when the tag contains
0x0F
is the Unique Identifier (UID) in
...n
1 16
maximum block number).*
maximum block
Class Series Programmer's Manual