Stx Kj Assign Communication Port (Mcl Command); Stx Ki Gpio Input - Datamax A-4310 Programmer's Manual

STX KJ Assign Communication Port
This command assigns a communication port for specific use. When activating MCL, all ports are
assigned to MCL; this command allows changes to that assignment.
Syntax:
Where:
Sample:
The sample forces the Ethernet port to bypass MCL and go directly to DPL.
STX KI GPIO Input
This command configures the GPIO input channels of the Applicator Interface Card; see Appendix J
for details.
Syntax:
Where:
94
Extended System-Level Command Functions
<STX>KJpf<CR>
- Port ID: P = Parallel
p
S = Serial (A)
U = USB
N = Ethernet
L = Wireless
A = Serial (B)
- Flag: 1 = DPL
f
0 = MCL
<STX>KJN1
<STX>KIffnspwww<CR>
- 2 character function name abbreviation (e.g., PS [Print Start],
ff
I1 [User Input 1], etc).
- Pin number, where 1 – 8 is the valid range.
n
- Signal type, where: L = Level; P = Positive Pulse; and N =
s
Negative Pulse
- Polarity, where: 0 = Active Low; and 1 = Active High
p
- 3 character filter pulse width, in milliseconds.
www
(MCL Command)
Class Series Programmer's Manual