Connecting The Printer Via A Cable Or Radio; Installing A Data Cable; Bluetooth And/Or 802.11B Parameters - Datamax OC2 BT Technical Manual And User Manual

Connecting the printer via a cable or radio

The OC-2 printer is designed to transmit and receive data from
a host terminal. The host terminal may be your computer,
handheld, or laptop. Communication can occur using one of the
following methods:
• Using a data cable to connect the printer and the host
terminal (this page), or
• Enabling wireless communication (see "Bluetooth and/or
802.11b parameters" on page 10).

Installing a data cable

1. Verify the printer settings before connecting the printer to
a host terminal. For more information, see "Printing a
selftest" on page 8.
2. Insert the data cable plug into the printer's data port
(Figure 26).
Data port
Figure 25
3. Connect the data cable to the host or device you are using.
Removing a data cable
1. Rotate the printer so that the printer's data port is visible.
2. Lift the cable connector's lever and remove the cable.

Bluetooth and/or 802.11b parameters

Your printer is configured with default factory settings. To
determine your printer's radio configuration, print a self-test
(For more information, see "Printing a self-test" on page 8). If
you have multiple printers, configure them specifically for use
in your environment.
S
ETTING UP YOUR PRINTER
Figure 26
9