Advertisement
: Pyxis400 DISASS'Y SOP
Document No.
Take out the brackets of Panel
Operation Name :
Glove Requirements: Half-finger gloves
Reserved jack
Note: If finding anything uncommon, notice foreman or assistant at once.
Fixture list (Specification)
Electric Screwdriver (S-4000MS)
Bits Type: T15,φ=5mm,L=60mm
Tabulator：
Xin-Xin Chen
Standard Operation Procedure
Fig. 1
Oval hole
PCB
Qty.
1
1
Auditor ： Ethan Lai
Ver. :
Steps：
1. Unscrew (× 2) all joints to take out Bracket-R
and Bracket-L (Fig. 2, 3).
First unscrew the round hole, then unscrew
the oval hole (Fig. 2).
Torsion: 4.0 ± 1.0 kgf.cm
Take the screwdriver vertically to the screw
holes.
Round hole
Fixture list (Specification)
Issue Department：
Station :
1.00
2017/5/23
Date
:
Fig. 2
Fig. 3
NPSU-PPE
31(1/1)
Qty.
Advertisement
